This is a black anodized aluminum enclosure for the NucleoTNC PCB. This fits the Rev B NucleoTNC PCB. (The Rev A board will work, but the power LED will need to be bent into position.) The assembled enclosure is 103x71x25mm.
This enclosure comes with two metal halves that fit together, a front face plate with holes for the indicator LEDS and a a rear plate with holes for the Nucleo32 USB connector, the reset button, and the 3.5mm jack. The front and rear plates are made of FR-4 PCB material and have white and silver lettering.
The Nucleo32 board must be raised off the PCB by 1.6mm using a spacer in order fit in the case. The Nucleo32 should be properly soldered to the PCB, rather then press-fit into the PCB to prevent accidental shorts and possible damage to the Nucleo32 board.
You will receive a metal enclosure in two parts, a front plate, a rear plate, and 8 M2.5x5mm screws.
You will need a 2mm hex driver or allen wrench to assemble the enclosure.