Mobilinkd

NucleoTNC PCB Enclosure

This is a black anodized aluminum enclosure for the NucleoTNC PCB.  This fits the Rev B NucleoTNC PCB.  (The Rev A board will work, but the power LED will need to be bent into position.)  The assembled enclosure is 103x71x25mm.

This enclosure comes with two metal halves that fit together, a front face plate with holes for the indicator LEDS and a a rear plate with holes for the Nucleo32 USB connector, the reset button, and the 3.5mm jack.  The front and rear plates are made of FR-4 PCB material and have white and silver lettering.

The Nucleo32 board must be raised off the PCB by 1.6mm using a spacer in order fit in the case.  The Nucleo32 should be properly soldered to the PCB, rather then press-fit into the PCB to prevent accidental shorts and possible damage to the Nucleo32 board.

You will receive a metal enclosure in two parts, a front plate, a rear plate, and 8 M2.5x5mm screws.

You will need a 2mm hex driver or allen wrench to assemble the enclosure.

Shipping Notice

If you need expedited delivery inside or outside the US, we recommend UPS for delivery. Shipments outside the US will almost certainly incur VAT, duty and brokerage fees payable to UPS before delivery is made. You are responsible for paying these fees.

Orders are typically processed within 48 hours.

We now offer free domestic shipping on orders over $200!

For our German customers, please consider purchasing from Funktechnik Dathe. They offer excellent local sales, service and support.

Customers outside the US are responsible for all local taxes, import duties, tariffs, and fees.

Custom Cables from HamMadeParts

We do our best to stock cables to fit just about any HT on the market.  And we offer a Mini-DIN cable for mobile and base rigs with a standard...

x
x
Mastodon